TAP-X Features and Specifications
Features:
* Continuous 1db Level Steps from -52 to +7db
* Gain Mode automatically engages as the level is turned above unity gain (step 54)
* Remote Control of Level, Balance, Input Select, Buffer Mode, Mute, and Display
* Front Panel Control of Level, Input Select, Buffer Mode, Mute, TAPE, and Display
* Buffered and Switched TAPE Output (6 input version only)
* 100% passive or Buffer Mode for main output via remote or front panel (6 input model only)
* Any Input(s) can be programmed as an HT Input via a simple back panel button press
* Separate Buffered and level controlled Sub Output (6 input model only)
* Six input version = 6 RCA SUB Out + Main Out
* One input version = 1 RCA In + Dual RCA outputs
* Custom Remote Control Handset
* Display Dark setting for HT or dark listening
* Optional Channel Expansion Modules have trim up / trim down buttons for each channel
Performance:
* 'Teflon like' Arlon PCB Material used for Signal Path Circuit Boards
* Extreme quality relays rated for billions of operations
* Modular Design for minimum internal wiring keeping the signal path VERY clean
* Expansion modules connect via fiber optic cables - no chance of ground loops
* Entire Control System enters sleep mode after each command - NO clock noise
Endurance:
* A Minimum of Mechanical Parts - Maintenance free operation
* All switching via sealed relays rated for billions of operations
* Optical Encoder Level Control rated for millions of operations
* Optional Fiber Optic Expansion ports to add unlimited additional channels
Autoformer Pre-amp Specifications:
* Bandwidth: Below 10 Hz to over 100 KHz ( +/- 1db)
* Right Channel to Left Channel Level Matching: Closer than +/-.05dB
* THD: < 0.0008%
* Step Size: 1db (Mute / -52dB to +7db)
* Maximum Input Level: > 10V RMS
* Standard TAP-X has 2 Channels - Right/Left
* Maximum Channels: Unlimited
* Inputs: 6 RCA.
* Outputs: 2 RCA (100% Passive / Buffered and SUB Output)
* TAPE Outputs: 1 RCA (6 input version only)
* HT Bypass Inputs: Any of the 6 inputs programmed as HT via button press
* Size: 17"W x 8"D x 3-1/4"H
