BENSHAW RSi S4 Series, User Manual

Page: 106 / 182

98
Multifunction Input Terminal DI1 - DI5 & MOL Configuration I/O 02 - I/O 07
I/O: DI1 Config
02 Preset 1
I/O: DI2 Config
03 Preset 2
I/O: DI3 Config
04 Preset 3
I/O: DI4 Config
05 DRV/Frq Set
I/O: DI5 Config
06 Fault Reset
I/O: MOL Config
07 NO MOL
7 - PARAMETER DESCRIPTION
LCD Display
Range
Description Digital Inputs and Motor Overload configuration. The multi-function input terminals can be defined for
many different applications.
z
NOTE: The MOL Input is configured by factory default as a normally open external motor overload. It
can be used as an additional multi-function input by changing the value of parameter I/O 07.
See also I/O 44 (Inputs) on page 108
Displayed Name Function Parameter
Preset 1 (Default - I/O2 : DI1) Preset Speed Input 1 I/O 13-18
Preset 2 (Default - I/O3 : DI2) Preset Speed Input 2 I/O 13-18
Preset 3 (Default - I/O4 : DI3) Preset Speed Input 3 I/O 13-18
Coast Stop Drive will coast to stop. Will restart upon removal of input if run is active. AFN 20
DC Inject
Begin DC Injection braking FUN 06-09
DRV/Frq Set (Default - I/O5 : DI4)
Selects second DRV/Frq source. Used with local/remote switch. DRV 06, 07
Alt Ramp Select alternative ramp AFN 24, AFN 25
Fault Reset (Default - I/O6 : DI5) Remote fault reset
EMOP+
Increase speed of electronic motorized pot FUN 04
EMOP- Decrease speed of electronic motorized pot FUN 04
PID Disable Disables PID function AFN 31
Curr Lim Dis Disables current limit mode FUN 10
SL Override Removes control of serial link
FLY Dis Disables “Catch-on-the-fly” mode AFN 18
CurLimIMax Sets current limit to maximum value FUN 10-18
Jog FWD
Jog in Forward I/O 12
Jog REV
Jog in Reverse I/O 12
NO MOL (Default - I/O7 : MOL) Normally Open motor overload I/O 07
NC MOL Normally Closed motor overload I/O 07
Timer 1 Timer 1 coil FUN 34
Timer 2 Timer 2 coil FUN 36
Seq 1
Activate sequencer 1 APP Group
Seq 2
Activate sequencer 2 APP Group
Seq 3 Activate sequencer 3 APP Group
Seq Dwell Sequencer dwell mode (pause) APP Group
Seq Advance Sequencer advance (skip) APP Group
Not Assign Input has no function APP Group