BENRUBI izzy IZ-1105 MAGNUM, Instruction Manual, Page: 20 / 23

19
NOTE! If you press the steam switch, the steam emission stops for a few seconds, it is
normal and indicates that the water pumping process from the tank to the boiler has been
activated.
Steam Modes
There are two steam modes: "PRO" and "AUTO"
Press and hold the steam button (3) together with the function button (21) at the same
time for 2 seconds to change the steam mode. The corresponding “PRO” (23) and
“AUTO” (22) indication lights will turn on.
“PRO” mode
• Press the steam button (3) lightly once and the iron produces steam and will stop generating
steam when you release the button.
• Press the "steam button" quickly twice to create a steam shot.
• Only one steam shot cycle can be activated after quickly pressing the steam button (3) twice.
• An interval of at least 15 seconds must be maintained between two continuous cycles.
“AUTO” mode
• Press the steam button (3) lightly to enter the steam release mode automatically.
• When you move the iron horizontally, the steam will be released automatically (without pressing
the steam button) and will stop releasing when you stop moving the iron.
Water Refill in the Water Tank
1. If the water runs out during ironing, a beep will sound and the water fill indication light (9) will
turn on.
2. Remove the water tank (14) and fill with water to the “MAX” mark.
3. Replace the water tank (14) until a "click" is heard. A beep sounds and the indication light (9)
will turn off.
Notes:
• The indicator light will not turn off if you do not insert the water tank correctly.
Automatic Power Off
• If the iron is placed vertically for 8 minutes and there is no function, such as button operation
or shaking the iron within 8 minutes, the function indication light (21) will flash while the power
indicator light (8) will remain on in standby mode. To retrieve, you can press the function button
(21), the steam button (3) or shake the iron.
• If the iron is placed horizontally for 30 seconds and there is no function such as button operation
or shaking the iron within 30 seconds, the function indication light (21) will flash while the power
indicator light (8) will remain on in standby mode. To retrieve, you can press the function button
(21), the steam button (3) or shake the iron.