19
Oscillation control
To make the fan oscillating, press the oscillation knob located on the top of the motor housing.
To get the directional airflow, press the oscillating knob, once more. To stop the oscillation pull
up the knob.
Tilting control
Unscrew the tilting knob, adjust the fan head to the desirable angle by holding the fan head,
then tighten the knob.
Overheat Protection Function
A thermostat was built-in motor. The fuse will be auto-cutout when motor temperature exceeds
the limit cause by any accident.
Cleaning and Storage
CAUTION:
Always turn the switch to “0” position and disconnect the cord from the electrical
outlet before any cleaning or maintenance operations.
• Light accumulated dust may be removed from the fan with a soft cloth moistened (not
dripping wet) with a solution of mild detergent and water. Dry the surface of the appliance
thoroughly with a soft dry cloth before operating the fan.
CAUTION:
To prevent the risk of electric shock, do not immerse the appliance in water or any
other liquid.
• Do not place and do not use the appliance where it may get wet or come in contact with
water. Never plug the appliance in the supplier mains in case that its surface is wet or even
damp.
Oscillation control
Up
Down
Summary of Contents for izzy FS 40-302
Page 2: ...1 Περιεχόμενα Contents GR Σελίδες 2 11 EN Pages 12 21 ...
Page 23: ...22 ...
