BENRUBI Fan 3 in 1 IZ9007, Instruction Manual

Page: 22 / 24

21
1. Plug in the appliance.
2. Press the power button (22) on the control panel or the power button (26) on the remote
control.
3. Press consecutively the speed control button (21) on the control panel or the speed control
button (25) on the remote control. The display will show the speeds:
F1 – Low speed
F2 – Middle speed
F3 – High speed
4. Press the oscillation button (20) on the control panel or the oscillation button (28) on the
remote control. Press again to stop oscillation.
5. Adjust the desired angle by moving the head up or down respectively.
6. Press the power button (22) on the control panel or the power button (26) on the remote
control to turn off the appliance.
7. Disconnect from the power outlet when not in use.
Timer Setting
Setting (through control panel)
1. While the fan is on, press the oscillation button (20) for 3 consecutive seconds until the timer
indicator (24) illuminates at the bottom of the control panel and the display (23) flashes.
2. Press consecutively the oscillation button (20) until the desired time (1-18 hours) of the fan is
displayed on the display screen (23). The display will stop flashing and the fan will operate for
the hours you have set.
3. When the time you set is complete, the fan will automatically stop working.
4. Disconnect from the power outlet when not in use.
Setting (through remote control)
1. Press the timer button (27) while the fan is on. The timer indicator (24) will illuminate at the
bottom of the control panel and the display (23) will flash.
2. Press repeatedly until the desired time (1-18 hours) of the fan is displayed on the display
screen (23). The display will stop flashing and the fan will operate for the hours you have set.
3. When the time you set is complete, the fan will automatically stop working.
4. Disconnect from the power outlet when not in use.
Care and Cleaning
• Switch off and unplug the appliance before cleaning.
• Do not disassemble the fan to clean it.
• At regular intervals, clean the main body of the appliance with a soft cloth and dry thoroughly.
• Never use highly corrosive or abstractive cleaning agents. Never use metal brushes or sponges
for cleaning and do not immerse the appliance in water.
• To ensure that the air circulates properly on the motor, keep the air outlets at the rear of the
motor clean.