31
Important safety instructions
Saturation is the amount of that color in a video picture. Lower settings produce less saturated
colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that
color will be overpowering and unrealistic.
6. To leave and save the settings, press
MENU/EXIT
.
Setting Film Mode
Highlight
Film Mode
in the
Display
menu and select
On
by pressing / on the projector or remote
control.
This feature helps improve picture quality when projecting composite or S-video image from a film-
sourced DVD or Blu-ray Disc.
Setting 3D Comb Filter
Highlight
3D Comb Filter
in the
Display
menu and select
On
by pressing / on the projector or
remote control.
This feature separates composite signal to Y (brightness) signal and C (color) signal, and can help produce
clearer and sharper images with correct colors in place.
This function is only available when a composite or S-video signal is selected.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have
made a correct connection to the projector audio input. See
"Connecting with video equipment" on
for how the audio input is connected.
Muting the sound
To temporarily turn off the sound:
1. Press
MENU/EXIT
and then press / until the
Audio Setup
menu is highlighted.
2. Press
to
highlight
Mute
and press / to select
On
.
If available, you can also press MUTE on the remote control to toggle projector audio between on and off.
Adjusting the sound level
To adjust the sound level, press
/
on the projector or remote control, or:
1. Repeat steps 1 above.
2. Press
to
highlight
Volume
and press / to select a desired sound level.
Turning off the
Power On/Off Ring Tone
To turn off the ring tone:
1. Repeat steps 1 above.
2. Press
to
highlight
Power On/Off Ring Tone
and press / to select
Off
.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound
level will not affect the Power On/Off Ring Tone.
