
English
30 OSD (On-Screen Display) menu
Item
Function
Operation
Range
Noise
Reduction
Select to reduce the noise level of connected
equipment.
Press
◄
or
►
to change
selection.
On
Off
Auto
Press the OK button to automatically adjust the
display settings to optimize performance based
on the VGA mode.
Press OK
Screen
Press the OK button to enter the VGA Setting. Press OK
Horizontal
Pos.
Adjusts the position of the picture left and right
in the window based on the VGA mode..
Press
◄
or
►
to change
selection.
0 to 100
Vertical
Pos.
Adjusts the position of the picture up and down
in the window based on the VGA mode..
0 to 100
Clock
Controls the width of the picture based on the
VGA mode
-30 to +30
Phase
Controls the signal phase, which can improve
focus clarity and image stability based on the
VGA mode.
0 to 100
Setting up User Picture mode
You can adjust the settings in the Picture menu and save them as your
Personal Picture Mode. You can press
P.MODE
on the remote control to select
these modes directly.
1. Press
Menu
to display the OSD menu on-screen.
2. Press
◄►
to select PICTURE, and then press OK to enter the PICTURE menu.
3. Press
▼
to select Picture Mode, and then press
◄
or
►
to select User
4. Press
▲
or
▼
o select Contrast, Brightness, Saturation, Sharpness, Tint and
then press
◄
or
►
to adjust the settings to your satisfaction.
5. Press
Menu
o save the settings and close the OSD menu.
PICTURE
Picture Mode
User
◄►
Contrast
50
Brightness
50
Saturation
50
Sharpness
50
Tint
0
EXIT
OK