![background image](http://html.mh-extra.com/html/benq/th682st/th682st_user-manual_2735014044.webp)
Operation
44
Function
Description
Standby
Settings
Monitor Out
Selecting
On
enables the function. The projector can output a VGA
signal when it is in standby mode and the
COMPUTER 1
jack is
correctly connected to devices. See
"Connection" on page 15
for how
to make the connection.
Audio Pass Through
Press / to choose the source that you wish to use in operation
mode. See
"Connection" on page 15
for how to make the connection.
When the corresponding jacks are correctly connected to the device,
the projector can output an audio signal to the external speaker when
it is in standby mode. The built-in speaker(s) will be muted in standby
mode.
Enabling this function slightly increases the standby power consumption.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain:
Phase
,
H. Size
,
Projector
Installation
,
Color Space Conversion
,
High Altitude Mode
,
Security
Settings
and
Baud Rate
.
Current
System
Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the
PICTURE
menu.
Lamp Mode
Shows the current lamp mode.
Resolution
Shows the native resolution of the input signal.
3D Format
Shows the current 3D mode.
Color System
Shows input system format.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Shows the firmware version of your projector.
5.
S
Y
STE
M
SET
U
P: Advanced
men
u
6. INFORMATION
men
u
Downloaded From projector-manual.com BenQ Manuals