Introduction
7
Introduction
Projector features
The projector offers the following features
•
ECO BLANK saves 70% of lamp power
By pressing the
ECO BLANK
button to hide the image and immediately lower 70% of
the lamp power at the same time.
•
Less than 0.5W in standby condition
Less than 0.5W power consumption under standby mode.
•
Filter Free
Filter free design to lower maintenance and operating costs.
•
Network Control
Integrated RJ45 connector for wired network control allowing management of
projector status from a computer using a web browser.
•
Crestron RoomView
®
, PJ Link and AMX supported
The projector supports Crestron eControl and RoomView, PJ Link and AMX allowing
you to control and manage equipment from a remote computer via LAN connection.
•
One-key auto-adjustment
Pressing
AUTO
on the keypad or remote control to show the best picture quality
immediately.
•
Built-in 10W speaker(s)
Built-in 10W speaker(s) providing mixed mono audio when an audio input is connected
•
Quick Cooling, Auto Power Off, Signal Power On, Direct Power On
Quick Cooling
function speeds up the cooling process when turning off the
projector.
Auto Power Off
function allows the projector to turn off automatically if
no input signal is detected after a set period of time.
Signal Power On
function turns
on your projector automatically once detecting the signal input and
Direct Power
On
boots up the projector automatically when the power is connected.
•
Instant Restart
Selectable
Instant Restart
function enables you to restart the projector immediately
within 90 seconds after turning it off.
•
3D Function supported
Various 3D formats make the 3D function more flexible. By presenting the depth of the
images, you can wear BenQ 3D glasses to enjoy the 3D movies, videos and sporting
events in a more realistic way.
•
The apparent brightness of the projected image will vary depending on the ambient lighting conditions,
selected input signal contrast/brightness settings, and is directly proportional to projection distance.
•
The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This
is normal and expected behavior.
