![background image](http://html.mh-extra.com/html/benq/st430k-series/st430k-series_installation-manual_2733808003.webp)
3
Introduction
This document describes the hardware interface spec and software protocols between Commercial
Display and PC.
The set protocol contains two sections command: Set-Function and Get-Function
In this document, "PC" represents all the control units that can send or receive the protocol command.
Control via LAN
Find the Wired LAN IP address of the connected display from the OSD menu and make sure the display and the
computer are within the same network.
IP Protocol Port: 4660
PC or laptop
LAN cable
RJ45 port on a display