3. Trouble Shooting - 9
3. Trouble Shooting
The SP0005/SP0008/SP0016 can be easily monitored by its LED indicators.
Please follow the troubleshooting steps below to solve any problem you may
encounter during installation or implementation of the SP0005/SP0008/
SP0016.
1. Power LED is not lit
Check if the power cord is properly connected to the external power
adapter and the power outlet. Make sure the DC power jack is firmly
plugged into the power socket of the switch.
2. 100M Link/Activity(Green) is not lit when connect to 100
Mbps device
• Check the power switch of the network device attached to the switch;
make sure it is turned ON.
• Check the network cable; make sure it is properly connected to the switch
and the network device.
• Check the network cable; make sure the UTP cables comply with EIA/TIA
568 and Category 5 specification.
Please perform the following tests
• Please check whether the RJ-45 cable is functional. Replace with another
working cable and see whether the condition can be improved.
• Use another port on the SP0005/SP0008/SP0016. If a link can be established
this way, the first port is faulty. Please contact your local Benq dealer for
assistant.
• Make sure that all devices are connected to the network.
• Please ensure that the network adapter cards installed in the workstation
or other devices to the switch are in well working condition.
[!] Contact your dealer if problem persists.
Summary of Contents for SP0005
