Connection
18
Connecting the multimedia inputs
To view multimedia files on the USB flash drive:
1. Plug the USB flash drive in the
M-USB
port.
2. A dialog box appears on the screen. Select
Ok
to enter the multimedia mode.
Connecting the touch module
Connect the USB TYPE A FOR TOUCH (type A) jack (
TOUCH USB 1
or
TOUCH
USB-2
) on the display to the USB port of a computer using the supplied USB cable. The
touch module of the display supports easy Plug-and-Play operation. There is no need to
install additional drivers on the computer.
The cables are not supplied and should be purchased separately.
• Avoid blocking the touch screen frame (where sensors are located) when initiating the touch
module.
• It is highly recommended that you connect the display to the PC or laptop directly. Avoid
connecting the display to a face plate device which may cause failures in touch operations.
• If any ghost image occurs, please try to unplug and then re-plug all USB cables. If the failure
image still exists, use another USB type A to A cable.
•
TOUCH USB 1
must be used with
HDMI 1
, and
TOUCH USB-2
must be used with
VGA
,
HDMI 2
,
HDMI 3
,
HDMI 4
, or
HDMI 5
.
USB flash drive
USB cable
Computer
