Preparation for Setup
10
Touch Module Installation
Screen Tolerance
The ambient light or directly sun light is possible to impact the screen size of
touch area or cause interference.
In this case, make screen size smaller or turn to pen mode with PointWrite
pen for better writing quality.
#
Item
Specification
1 Horizontal Position Center Line of beamed screen.
2 Vertical Position
Ceiling Mounting: Top of the screen with Gap.
Table Mounting: Bottom of the screen with Gap.
3 Gap
Min: 50mm, max: 100mm, normal: 70mm
4 Orientation
Head of laser module should be face to touch
screen.
5 Touch Area
Min: 65”, max: 100” (without external lighting
interference)
Center line of touch area
Touch module
Frame
Surface
Touch area
50-100mm
50mm
50mm
50mm
