BenQ PL19_D, User Manual

Page: 3 / 20

2 English
3. Connect the power cord of the lamp to the power adapter (as shown by in the figure) and
plug it into a power outlet (as shown by in the figure).
Upon receiving power from the power outlet, the lamp’s warm-up process will start
automatically and will take approximately 5 seconds. Please DO NOT turn off the lamp during
the warm-up process. You can start using the lamp when the process is complete.
Using the Lamp
Turning on/off the Lamp and Entering Auto Dimmer Mode
• Do not block the light sensor on the lamp. Otherwise the Auto
Dimmer Mode will not function properly.
• If the Auto Dimmer Mode is turned on, the lamp will monitor the
ambient lighting condition and dynamically adjust the brightness
setting.
• The Auto Dimmer Mode will exit automatically when you manually
adjust brightness or color temperature.
Manually Adjusting Brightness and Color Temperature
If power supply to the lamp is interrupted unexpectedly, the lamp will resume the last used
brightness and color temperature settings upon the recovery of power supply.
Turning on/off the Lamp
To turn on the lamp, touch the Power button. To turn off the
lamp, touch the Power button again.
Entering Auto Dimmer Mode
To enter Auto Dimmer Mode, touch the Auto Dimmer Mode
button when the lamp is on. The Auto Dimmer Mode button will
light up. The Auto Dimmer Mode automatically adjusts the lamp’s
brightness according to the ambient lighting condition.
Light sensor
Adjusting Brightness
When the lamp is on, touch the button to increase brightness,
or the button to decrease it. You can select from 15 brightness
levels.
Adjusting Color Temperature
When the lamp is on, touch the button for yellowish, or the
button for blueish light. You can select from 6 color temperature
settings: 5000K, 4500K (neutral white), 4000K, 3500K (warm
white), 3000K and 2700K (soft white).