Maintenance
30
LED
Status & Description
Power Temp
Lamp
Power events
Power switch on
-
-
Power-up cooling. The projector cooling system will cool down
for 90 seconds when the power was abnormally shutdown with-
out cooling and turned on again within hours.
-
-
Stand-by
-
-
Lamp LED is blinking during powering up.
-
-
Power-down cooling for 90 seconds after power has been turned
off.
-
-
Normal operation
Lamp events
-
-
Lamp spoil. It is warning you that lamp usage has exceeded
2000 hours. Replace the projection lamp with a new one imme-
diately.
-
-
Lamp error. The lamp is not properly attached or the lamp is
damaged. Please contact your dealer for assistance.
Thermal events
-
Fan 1 error. The projector will shutdown automatically. If you
re-turn on the power, the projector will shutdown again. Please
contact your dealer for assistance.
Fan 2 error. The projector will shutdown automatically. If you
re-turn on the power, the projector will shutdown again. Please
contact your dealer for assistance.
Fan 3 error. The projector will shutdown automatically. If you
re-turn on the power, the projector will shutdown again. Please
contact your dealer for assistance.
O
O
O
O
O
G
O
G
R
R
R
R
R
R
G
R
R
G
