Controlling the projector remotely through a web browser
15
Projecting computer screen contents
One projector displaying one computer screen
1.
Connect the computer to the projector. See
"Connecting the projector with your
computer" on page 3
for detail.
2.
Make sure QPresenter is downloaded and installed. See
"Downloading QPresenter"
on page 5
and
"Installing QPresenter" on page 5
for detail.
3.
Open QPresenter by clicking the icon.
4.
Type the projector IP address and click Connect. Or you can search for projectors,
simply click Search to list all the projectors on the same local area network. Click the
desired projector in the Search result list, and click Connect. You can also type a
desired projector name and click Search.
5.
To play sound through the projector speaker, simply click Activate audio out.
Using the USB cable to display computer content
(for selected models)
1.
Take a USB cable and connect one end to your computer and the other end to the
USB mini B port on the projector.
2.
Press
SOURCE
and select
USB Display
in the source bar.
3.
Go to My Computer on you PC and double-click the BenQ QPresenter icon.
4.
The projector automatically displays the content in your computer.
Supported Resolutions
The projected computer screen will be automatically rescaled to 1024 x 768.
Using the Projection Login Code
This function is designed to ensure network display through the correct projector. To
toggle this function:
1.
Go to the
SYSTEM SETUP: Advanced
>
Network Settings
menu after
opening the OSD menu system. Press
MODE/ENTER
.
2.
Press
to
highlight
Projection Log In Code
and press
/
to select
On
or
Off
.
When this function is on, the projector generates a random 4-digit code in the upper right
corner when you switch the source to Network Display. You need to key in this 4-digit
code in the QPresenter when connecting to the projector.
