BenQ MW809ST, User Manual

Page: 32 / 48

32 Menu operation
Network (MX825ST/MW826ST)
Settings
Reset Display
Returns all of the adjustments you’ve made for the Display menu to the factory
preset values.
Wired LAN See BenQ Network Projector Operation Guide .
AMX Device
Discovery When this function is On , the projector can be detected by AMX controller.
MAC Address
(Wired) Displays the mac address for this projector.
Projector
Installation The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Choosing a location on page 12 .
Remote
Receiver Allows you to enable all the remote receivers or one specific remote receiver on
the projector.
Auto Source
Search Allows the projector to automatically search for a signal.
Auto Signal
Adjustment
• On : Allows the projector to automatically determines the best picture timings for
the displayed image when PC signal (analog RGB) is selected and AUTO is
pressed.
• Off : The projector will not respond when AUTO is pressed.
Lamp Settings
• Lamp Mode : See Setting the Lamp Mode on page 37 .
• Reset Lamp Timer : See Resetting the lamp timer on page 40 .
• Lamp Timer : Displays the number of hours the lamp has been used.