
Operation
40
Controlling the projector through a Lan
Controlling the projector through a Lan
Controlling the projector through a Lan
Controlling the projector through a Lan
environment
environment
environment
environment
Lan Control Settings
Lan Control Settings
Lan Control Settings
Lan Control Settings allow you to manage the projector from a computer using a web
browser when the computer and the projector are properly connected to the same local area
network.
Configuring the
Configuring the
Configuring the
Configuring the Lan Control Settings
Lan Control Settings
Lan Control Settings
Lan Control Settings
If you are in a DHCP environment:
If you are in a DHCP environment:
If you are in a DHCP environment:
If you are in a DHCP environment:
1.
Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector
and the other end to the RJ45 port.
2.
Press MENU/EXIT
MENU/EXIT
MENU/EXIT
MENU/EXIT and then press /
until the SYSTEM SETUP: Advanced
SYSTEM SETUP: Advanced
SYSTEM SETUP: Advanced
SYSTEM SETUP: Advanced menu
is highlighted.
3.
Press to highlight Lan Control Settings
Lan Control Settings
Lan Control Settings
Lan Control Settings and press MODE/ENTER
MODE/ENTER
MODE/ENTER
MODE/ENTER. The Lan Control
Lan Control
Lan Control
Lan Control
Settings
Settings
Settings
Settings page displays.
4.
Press
to
highlight
Control
By
Control By
Control By
Control By and press /
to select RJ45
RJ45
RJ45
RJ45.
5.
Press
to
highlight
DHCP
DHCP
DHCP
DHCP and press /
to select On
On
On
On.
6.
Press
to
highlight
Apply
Apply
Apply
Apply and press MODE/ENTER
MODE/ENTER
MODE/ENTER
MODE/ENTER.
7.
Re-enter the Lan Control Settings
Lan Control Settings
Lan Control Settings
Lan Control Settings page. The Projector IP Address
Projector IP Address
Projector IP Address
Projector IP Address, Subnet Mask
Subnet Mask
Subnet Mask
Subnet Mask,
Default Gateway
Default Gateway
Default Gateway
Default Gateway, and DNS Server
DNS Server
DNS Server
DNS Server settings will display. Note down the IP address
displayed in the Projector IP Address
Projector IP Address
Projector IP Address
Projector IP Address row.
If the Projector IP Address still does not display, contact your ITS administrator.
If you are in a non-DHCP environment:
If you are in a non-DHCP environment:
If you are in a non-DHCP environment:
If you are in a non-DHCP environment:
1.
Repeat steps 1-4 above.
2.
Press
to
highlight
DHCP
DHCP
DHCP
DHCP and press /
to select Off
Off
Off
Off.
3.
Contact your ITS administrator for information on the Projector IP Address
Projector IP Address
Projector IP Address
Projector IP Address, Subnet
Subnet
Subnet
Subnet
Mask
Mask
Mask
Mask, Default Gateway
Default Gateway
Default Gateway
Default Gateway, and DNS Server
DNS Server
DNS Server
DNS Server settings.
4.
Press to select the item you want to modify and press Mode/Enter
Mode/Enter
Mode/Enter
Mode/Enter.
5.
Press /
to move the cursor and the press
/ to enter the value.
6.
To save the settings, press Mode/Enter
Mode/Enter
Mode/Enter
Mode/Enter. If you do not want to save the settings, press
Menu/Exit
Menu/Exit
Menu/Exit
Menu/Exit.
7.
Press
to
highlight
Apply
Apply
Apply
Apply and press MODE/ENTER
MODE/ENTER
MODE/ENTER
MODE/ENTER.
http://www.pureglare.com.au