![background image](http://html.mh-extra.com/html/benq/mp610-svga-dlp-projector/mp610-svga-dlp-projector_user-manual_2734676014.webp)
Introduction
8
Controls and functions
External control panel
1.
Power (Refer to
and
for more infor-
mation.)
Turns the projector on or off.
2.
Blank (Refer to
for more information.)
Used to hide the screen image. You can press any key on the control panel to bring the
image back.
3.
for more information.)
Depending upon which input signal is selected, there are several picture setup options
available.
4.
Source (Refer to
"Switching input signal" on page 25
for more information.)
Sequentially selects the input signal RGB, Component Video,
S-Video or
Video.
5.
"Auto-adjusting the image" on page 23
for more information.)
Automatically determines the best picture timings for the displayed image.
6.
Lamp indicator light (Refer to
for more information.)
Indicates the status of the lamp. Lights up or flashes when the lamp has developed a
problem.
7.
Temperature warning light (Refer to
for more information.)
Flashes red if the projector’s temperature becomes too high.
8.
Power indicator light (Refer to
for more information.)
Lights up or flashes when the projector is under operation.
9.
3
Left
10.
Right
4
"Correcting keystone" on page 24
for more information.)
When the on-screen menu is not activated, #9 and #10 function as Keystone -/+ hot
keys.
11.
6
for more information.)
Turns on the on-screen display control menu.
1
2
9
8
7
12
6
5
10
4
11
3
13
14
I
I