36 Menu
operation
Network
Settings
Reset Display
Returns all of the adjustments you’ve made for the
Display
menu to the factory
preset values.
Wireless LAN
See
BenQ Network Projector Operation Guide
, which can be downloaded from
BenQ product webpage.
Wired LAN
AMX Device
Discovery
When this function is
On
, the projector can be detected by AMX controller.
MAC Address
(Wireless)
Displays the mac address for this projector.
MAC Address
(Wired)
Projector
Installation
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
Choosing a location on page 12
.
Remote
Receiver
Allows you to enable all the remote receivers or one specific remote receiver on
the projector.
Auto Source
Search
• Allows the projector to automatically search for a signal.
The following signal source(s) will not be automatically detected by the projector, and you’ll have to
manually select it from the source selection bar:
Network Display
,
USB Reader
.
Auto Signal
Adjustment
•
On
: Allows the projector to automatically determines the best picture timings for
the displayed image when PC signal (analog RGB) is selected and
AUTO
is
pressed.
•
Off
: The projector will not respond when
AUTO
is pressed.
Lamp Settings
•
Lamp Mode
: See
Setting the Lamp Mode on page 42
.
•
Reset Lamp Timer
: See
Resetting the lamp timer on page 45
.
•
Lamp Timer
: Displays the number of hours the lamp has been used.
Operation
Settings
Quick Cooling
:
Selecting
On
enables the function and projector cooling time will be shortened
from a normal 90-second duration to approximately 15 seconds.
Blank Timer
Sets the image blank time when there is no action taken on the blank screen, once
elapsed the image will return to the screen. If the preset time spans are not suitable
for your need, select
Disable
. No matter
Blank Timer
is activated or not, you
can press most of the keys on the projector or remote control to restore the
picture.