background image

Important safety instructions

3

Important safety instructions

Your projector is designed and tested to meet the latest standards for safety of information 

technology equipment. However, to ensure safe use of this product, it is important that 

you follow the instructions mentioned in this manual and marked on the product. 

Safety Instructions

1.

Please read this manual before 
you operate your projector.

 Save 

it for future reference. 

2.

Do not look straight at the 
projector lens during operation.

 

The intense light beam may damage 
your eyes. 

3.

Refer servicing to qualified 
service personnel.

 

4.

Always open the lens shutter or 
remove the lens cap when the 
projector lamp is on.

 

5.

In some countries, the line voltage is 
NOT stable. This projector is 
designed to operate safely within a 
mains voltage between 100 to 240 
volts AC, but could fail if power cuts 
or surges of 

±

10 volts occur. 

In 

areas where the mains voltage 
may fluctuate or cut out, it is 
recommended that you connect 
your projector through a power 
stabilizer, surge protector or 
uninterruptible power supply 
(UPS). 

Summary of Contents for MH684












































































Reviews: