![background image](http://html.mh-extra.com/html/benq/mh534/mh534_user-manual_2733755011.webp)
Introduction 11
Controls and functions
Projector
5.
TEMP (temperature) warning
light
Lights up red if the projector's
temperature becomes too high. See
"Installing the dust filter (Optional
accessory)" on page 65
for details.
6.
LAMP indicator light
Indicates the status of the lamp. Lights
up or flashes when the lamp has
developed a problem. See
the dust filter (Optional accessory)" on
page 65
for details.
7.
POWER
Toggles the projector between standby
mode and on.
and
down the projector" on page 44
details.
8.
SOURCE
Displays the source selection bar. See
"Switching input signal" on page 33
details.
9.
BACK
Goes back to previous OSD menu or
exits and saves menu settings when it is
on top level of OSD menu.
10. MENU
Turns on the On-Screen Display (OSD)
menu, exits and saves menu settings.
11. AUTO
Automatically determines the best
picture timings for the displayed image.
See
"Auto-adjusting the image" on page
for details.
1.
Focus ring
Adjusts the focus of the projected
image. See
for details.
2.
Zoom ring
Adjusts the size of the image. See
tuning the image size and clarity" on
page 29
for details.
3.
OK
Selects an available picture setup mode.
See
"Selecting a picture mode" on page
for details.
Activates the selected On-Screen
Display (OSD) menu item.
See
for details.
4.
POWER indicator light
Lights up or flashes when the projector
is under operation. See
dust filter (Optional accessory)" on page
65
for detail.
1
2
4
5
6
8 9
7
12
12
13
1011
14
14
3
I
I