Operation 29
Fine-tuning the image size and clarity
1.
Adjust the projected image to the size
that you need using the zoom ring.
2.
Then sharpen the image by rotating the
focus ring.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either
the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you will need to manually
correct it following one of these steps.
• Using the remot e control
Press
/
on the projector or remote
control to display the Keystone correction page.
Press
to correct keystoning at the top of
the image. Press
to correct keystoning at
the bottom of the image.
• Using the OSD menu
1.
Press
MENU
and then press
/
until
the
DISPLAY
menu is highlighted.
2.
Press to highlight
Keystone
and press
OK
. The
Keystone
correction page
displays.
3.
Press
to correct keystoning at the
top of the image or press
to correct
keystoning at the bottom of the image.
Press
/ .
Press
/ .
