BenQ MH530FHD, User Manual

Page: 49 / 74

Operation 49
Description of each menu
• The default values listed in this manual, especially on pages 49-57 , are
for reference only. They may vary between the projectors due to the
continuous improvement to the products.
FUNCTION DESCRIPTION
Wall Color
Corrects the projected picture’s color when the projection
surface is not white. See "Using Wall Color" on page 37 for
details.
Aspect Ratio
There are four options to set the image's aspect ratio depending
on your input signal source. See "Selecting the aspect ratio" on
page 35 for details.
Keystone
Corrects any keystoning of the image. See "Correcting keystone"
on page 29 for details.
Position
Displays the position adjustment page. To move the projected
image, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you made
until they reach their maximum or minimum.
This function is only available when a PC signal
(analog RGB) is selected.
Phase
Adjusts the clock phase to reduce image
distortion.
This function is only available
when a PC signal (analog RGB) or YPbPr
(Component) is selected.
H. Size
Adjusts the horizontal width of the image.
This function is only available when a PC signal
(analog RGB) is selected.
Digital Zoom
Magnifies or reduces the projected image. See "Magnifying and
searching for details" on page 34 for details.
1. DISPLAY
men
u
http://www.pureglare.com.au