Operation
25
Switching input signal
The projector can be connected to multiple devices at the same time. However, it can only
display one full screen at a time. When starting up, the projector automatically searches for
the available signals.
Be sure the
Quick Auto Search
function in the
SOURCE
menu is
On
if you want the
projector to automatically search for the signals.
To select the source:
1.
Press
SOURCE
on the projector or remote
control. A source selection bar is displayed.
2.
Press
/
until your desired signal is selected
and press
MODE/ENTER
.
If available, you can also select the source by
pressing one of the Source buttons on the
remote control.
Once detected, the selected source information
will be displayed at the corner of the screen for
seconds. If there is multiple equipment
connected to the projector, repeat steps 1-2 to
search for another signal.
•
The brightness level of the projected image will change
accordingly when you switch between different input signals. Data (graphic) "PC" presentations using
mostly static images are generally brighter than "Video" using mostly moving images (movies).
•
For best display picture results, you should select and use an input signal which outputs at the projector’s
native resolution. Any other resolutions will be scaled by the projector depending upon the “aspect ratio”
setting, which may cause some image distortion or loss of picture clarity. See
for details.
Changing Color Space
In the unlikely event that you connect the projector to a DVD player via the projector’s
HDMI
input and the projected picture displays wrong colors, please change the color
space.
To do this:
1.
Press
MENU/EXIT
and then press / until the
SOURCE
menu is highlighted.
2.
Press to highlight
Color Space Conversion
and press / to select a suitable
color space.
This function is only available when the HDMI-input port is in use.
