Operation 31
6.
You have successfully assigned a new password
to the projector. Remember to enter the new
password next time the projector is started.
7.
To leave the OSD menu, press
MENU/EXIT.
Disabling the password function
To disable password protection, go back to the
SYSTEM SETUP: Advanced
>
Security Settings > Power on lock
menu after opening the OSD menu system. Select
Off
by pressing
/
.
The message
'INPUT PASSWORD'
displays. Enter the current
password.
• If the password is correct, the OSD menu returns to the
Security Settings
page with
'Off'
shown in the row of
Power on lock
. You will not have to enter
the password next time you turn on the projector.
• If the password is incorrect, the password error message displays lasting for three
seconds, and the message
'INPUT PASSWORD'
displays for your retry. You
can press
MENU/EXIT
to cancel the change or try another password.
Though the password function is disabled, you need to keep the old password in hand should you
ever need to re-activate the password function by entering the old password.
