Connecting to external display devices
30
Adjusting TV format selections manually
ATI CATALYST® Control Center determines the signal format from the
Regional and Language Options selections in Control Panel. However,
when you travel to another country/region, you might need to re-adjust
TV format selections manually. To do so, follow the steps below.
The settings of TV formats may vary by country/region. For details about
which format is used in your country/region, check with your local
authorities.
1. Double-click the
icon in the notification area located at the lower
right corner of the desktop to launch ATI CATALYST Control Center.
2. Select Formats from the left menu bar under Graphic Settings, click
the Select by country/region radio button, and then choose the desired
country/region from the drop-down list.
3. Click the Select by signal format radio button, and then choose the
desired signal format from the drop-down list.
4. Click Apply and then click OK to complete the settings.
JB_S73V.book Page 30 Thursday, February 8, 2007 4:48 PM
