Using BIOS setup
31
Boot menu
The Boot menu contains the boot configuration settings of the system. A
list of devices will be displayed under Boot Order.
•
Use < > or < > to select a device, and then press <F6> to move it up or
<F5> to move it down.
•
To select a boot device manually, press the <F9> key when the BenQ
logo appears on the screen during system startup. The Boot Menu will
appear. Use the up and down arrow keys ( , ) to select a boot device,
and then press <Enter> to confirm.
Exit menu
The Exit menu displays ways of exiting BIOS setup. After finished with
your settings, you must save and exit so that the new settings can take
effect.
•
Exit Saving Changes: saves the changes you have made and exits BIOS
setup. After finishing with your settings, you must save and exit so that
the new settings can take effect.
•
Exit Discarding Changes: exits BIOS setup without saving the changes
you have made.
•
Load Setup Defaults: loads factory default values for all the items.
•
Discard Changes: cancels all changes since last save, without exiting the
BIOS setup utility.
•
Save Changes: saves changes without exiting the BIOS setup utility.
It is recommended that you go into BIOS to load setup defaults,
whenever you have installed new hardware components.
Boot from LAN
During system startup, pressing <F12> will activate Boot from LAN
feature, enabling your Joybook to boot from an OS image via the
network.
JB_S31V.book Page 31 Wednesday, February 7, 2007 6:10 PM
