Using BIOS setup
35
•
System Time:
allows you to set the time of the system. Use
<+> or <-> to change the value.
•
System Date:
allows you to set the date of the system. Use
<+> or <-> to change the value.
Advanced menu
The
Advanced
menu contains advanced settings of the system.
•
AHCI Mode
: allows to enable AHCI (for better performance
during system boot).
Security menu
The
Security
menu contains the security settings, which
safeguard your system against unauthorized use.
•
Set Supervisor Password:
This set of password controls the
system supervisor's access to the whole BIOS setup utility.
When typing the password, first make sure Num Lock is off,
and then type your password in the entry field and press
<Enter>. Confirm your password by typing it again and
pressing <Enter>.
Boot menu
The
Boot
menu contains the boot configuration settings of the
boot device. A list of boot devices will be displayed.
• Use < > or < > to select a device, and then press <+> to
move it up or <-> to move it down.
• To select a boot device manually, press the <F12> key when the
BenQ logo appears on the screen during system startup. The
Boot Menu will appear. Use < > or < > to select a device, and
then press <Enter> to confirm.
Exit menu
The
Exit
menu displays ways of exiting BIOS setup. After
finished with your settings, you must save and exit so that the
new settings can take effect.
•
Exit Saving Changes
: saves the changes you have made and
exits BIOS setup. After finishing with your settings, you must
save and exit so that the new settings can take effect.
•
Exit Discarding Changes
: exits BIOS setup without saving
the changes you have made.
•
Load Optimal Defaults:
loads the default values for all the
items in the BIOS setup utility.
If you are not familiar with the items in the
Advanced
menu,
you are advised to keep the default. Setting values incorrectly
may cause system malformation.
Do NOT set the BIOS security password without having
memorized it or written it down and stored it with your Joybook
Lite warranty documentation. Should you happen to forget or
mislay the password once set, you will be greatly
inconvenienced in gaining subsequent access to your
Joybook Lite.
It is recommended that you go into BIOS to load manufacture
defaults, whenever you have installed new hardware
components.
