![background image](http://html1.mh-extra.com/html/benq/joybook-3000/joybook-3000_quick-start-manual_2733851027.webp)
Recommendations and Troubleshooting 27
CD or DVD does not function.
Please verify the following:
•
The computer is turned on, and the CD or DVD discs are properly
inserted in the centre of the disc tray in the optical drive.
•
The DVD disc tray is closed.
Noise from the optical drive when the disc plays shows that the optical drive
may be deformed, and the computer needs to be repaired. If the disc tray
does not open after the Eject button is pressed, insert a pin into the
Emergency Eject hole to force the tray out.
DVD movies will not play.
The region code of the DVD inserted must match that of the DVD playback
software used. This region code can be set up to five times. If you have not
reached this limit, a prompt will appear that will allow you to change the
region code of the software to match that of the move. Otherwise, you can
only play back DVDs with the same region code as the last DVD played back
successfully.
The computer is unable to use the infrared
port to communicate with other devices.
Please confirm the following:
•
Communication speeds for the computer and the external device are
identical.
•
The infrared port is clear.
•
There are no objects blocking the path between the computer and the
external device.
•
The distance and angle between the computer and device do not exceed
the effective range of the port.
•
You are not attempting to establish the link under conditions of direct
sunlight.
•
The infrared port is not facing any other infrared-enabled devices.
•
There are no incompatibilities between the communications software
that is attempting to establish the infrared link and any other
communications software on the computer. For further information,
please consult the manual for the particular software.