16 Installation
• Avoid positioning the antennas in a horizontal manner, this may result in a weak signal reception:
• If the InstaShow Host is attached to a metallic ceiling mount ensure that the antennas are at least 3
cm away from the metal portion of the ceiling mount:
For table placement
Position the antennas so that they are both pointed upwards roughly perpendicular to the table:
Connecting the HDMI cable and power
Once the InstaShow Host has been positioned properly near the display, connect the HDMI cable and
power to ensure signal transmission.
To supply power to the InstaShow Host, do one of the following.
Assembling the adapter on page 17
for details.
• Some BenQ projector models may be equipped with a USB type A jack (5V/1.5A) to provide power
supply to the InstaShow Host. See
Power supply via a USB type A jack (5V/1.5A) on page 18
for
details.
• For display models without a USB type A jack (5V/1.5A) for power supply, see
for details.
3 cm
3 cm
