![background image](http://html1.mh-extra.com/html/benq/instashow-wdc10c/instashow-wdc10c_user-manual_2733595011.webp)
11
Installation
Assembling the InstaShow Host
Assemble the InstaShow Host with two antennas by turning the antennas clockwise (right) and
counterclockwise (left) to fasten them tightly.
Setting up the InstaShow Host
You are provided with four different ways to position the InstaShow Host. The total weight of the
InstaShow Host Unit is 150g.
Attaching the InstaShow Host to the ceiling
1. Place the lid on the ceiling and locate the alignment hole.
2. Use the screws provided to lock the lid to the ceiling.
3. Lock the first hole (1).
4. Follow the instruction in the illustration below to lock the other holes (2-4).
5. Rotate the InstaShow Host counterclockwise to affix the InstaShow Host to the lid.
Attaching the InstaShow Host to a ceiling mount
If the display is mounted on the ceiling:
• Please only use the screws (M3*16 tapping screw) provided with the kit to mount the InstaShow Host to the
ceiling.
• Please see
Positioning the InstaShow Host antennas on page 15
for guidelines on positioning the antenna to
maximize signal reception.
open lock
open lock
1
2
3
4
open lock
Alignment
hole