32 Menu
operation
SYSTEM SETUP: ADVANCED menu
Menu Settings
•
Menu Position
: Sets the On-Screen Display (OSD) menu position.
•
Menu Display Time
: Sets the length of time the OSD will remain active after
your last key press.
•
Reminder Message
: Sets the reminder messages on or off.
Source
Rename
Renames the current input source to your desired name.
On the
Source Rename
page, use / / / , and
OK
to set the desired
characters for the connected source item.
When done, press
BACK
to save the changes and exit.
Auto Source
Allows the projector to automatically search for a signal.
Light Source
Information
•
Reset Lamp Timer
Resetting the lamp timer on page 39
•
Lamp Timer
Getting to know the lamp hour on page 35
.
HDMI
Settings
•
HDMI Range
Selects a suitable RGB color range to correct the color accuracy.
•
Auto
: Automatically selects a suitable color range for the incoming HDMI
signal.
•
Full
: Utilizes the Full range RGB 0-255.
•
Limited
: Utilizes the Limited range RGB 16-235.
•
CEC
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, turning on the HDMI CEC compatible device automatically turns on
the projector, while turning off the projector automatically turns off the HDMI CEC
compatible device.
•
Power On Link
/
Power Off Link
When you connect an HDMI CEC-compatible device to your projector with an
HDMI cable, you can set the behavior of powering on/off between the device and
the projector.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting
On
enables the function
and projector cooling time will be shortened from a normal 90-second duration to
approximately 15 seconds.
Password
See
Utilizing the password function on page 21.
Bidirectional
Turning on/off either the connected device or the
projector can turn on/off both.
From Projector
When the projector is turned on/off, the connected
device will be activated/shut down, too.
From Device
When the connected device is turned on/off, the
projector will be activated/shut down, too.
