![background image](http://html.mh-extra.com/html/benq/ht4050/ht4050_user-manual_2733765029.webp)
Operation
29
Operation
Starting up the projector
1.
Plug the power cord into the projector and into
a wall socket. Turn on the wall socket switch
(where fitted). Check that the
POWER
indicator light
on the projector lights orange
after power has been applied.
Please use the original accessories (e.g. power cable)
only with the device to avoid possible dangers such as
electric shock and fire.
2.
Press
POWER
on the projector
or remote control
to start the projector
and a start up tone sounds. The
POWER indicator light
flashes green and stays
green when the projector is on.
The fans starts operating, and a start-up image display on the screen while it warms
up. The projector does not respond to further commands whiles it is warm up.
(If necessary) Rotate the focus ring to adjust the image clearness.
To turn off the ring tone, see
"Power On/Off Ring Tone" on page 59
for details.
If the projector is still hot from previous activity, it will run the cooling fan for approximately 90
seconds before energizing the lamp.
3.
If this is the first time you turn on the projector, the setup wizard appears to guide
you through setting up the projector. If you have already done this, skip this step and
move on to step 5.
• Use the arrow keys (
▲
/
▼
/
◄
/
►
) on the projector or remote control to move
through the menu items.
• Use OK to confirm the selected menu item.
The Setup Wizard screenshots below are for reference only and may differ from the actual
design.
i. Specify
Projector Position
.
For more information about
projector position, see