![background image](http://html.mh-extra.com/html/benq/ht1070a/ht1070a_user-manual_2733751033.webp)
Operation 33
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined
picture modes so that you can choose one to
suit your operating environment and input
signal picture type.
To select an operation mode that suits your
need, you can follow one of the following steps.
• Press
OK
on the projector or
PIC MODE
on the remote control repeatedly until your desired mode is selected.
• Go to the
Picture Mode
menu (which is in the
Basic menu
when the projector
is with input signal or in the
Advanced menu
>
Picture
menu) and press
/
to select a desired mode.
The picture modes are listed below.
1.
Bright
mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using
the projector in well lit rooms.
2.
Vivid TV
mode: With well-saturated color, fine-tuned sharpness and a higher
brightness level,
Vivid TV
mode is perfect for watching movies in a living room
where there is a small amount of ambient light.
3.
Cinema
mode:
Complement with accurate color and deepest contrast at lower
brightness level, Cinema mode is suitable for playing movies in a totally dark
environment, as if in a commercial cinema.
4.
Sport mode: Optimize the green color and human skin performance for
watching sports games.
5.
User 1
/
User 2
mode: Recalls the settings customized based on the current
"Setting the User 1/User 2 mode" on page 33
for
details.
Setting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the User 1/User
2) as a starting point and customize the settings.
1.
Open the OSD menu and go to the
Picture Mode
function.
2.
Press
/
to select User 1 or User 2.
3.
Press
to select
User Mode Management
.
This function is only available when User 1 or User 2 mode is selected up in the
Picture Mode sub-menu item.
4.
Press
/
to select a picture mode that is closest to your need.
5.
Press
to select a sub-menu item to be changed and adjust the value with
/
. See
"Fine-tuning the image quality"
below for details.
6.
The settings will be saved when selecting.