Operation
52
The Information menu shows you the current operating status of the projector.
5. System Setup: Advanced
men
u
Network
Settings
Wired LAN
AMX Device Discovery
When
AMX Device Discovery
is
On
, the projector can be
detected by AMX controller.
MAC Address
Displays the mac address for this projector.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
Projector Installation, Language, High Altitude Mode, Security
Settings, Baud Rate.
6. Information men
u
Current
System
Status
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the
Picture
menu.
Resolution
Shows the native resolution of the input signal.
Lamp Mode
Shows the current lamp mode.
3D Format
Shows the current 3D mode.
Color System
Shows input system format, NTSC, PAL, SECAM or RGB.
Equivalent Lamp Hour
Displays the number of hours the lamp has been used.
Firmware Version
Displays the firmware version of the projector.
FUNCTION
DESCRIPTION
