34
Installation
The following table describes the items available in the
Installation
menu:
Item
Options and descriptions
Projector
Position
Chooses the position in which the projector is installed. See
Choosing a location on page 19
for more details.
Aspect Ratio
There are several options to set the image's aspect ratio depending on your input signal source. Options include:
•
Auto
: Scales an image proportionally to fit the projector's native resolution in its horizontal or vertical width.
•
4:3
: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio.
•
16:9
: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio.
Keystone
Setting
•
Auto Vertical Keystone
: Automatically corrects the keystoning at the top/bottom side of the projected image.
•
Vertical Keystone Correction
: See
Correcting keystone on page 26
for more details.
HDMI Format
Allows you to further configure HDMI settings
•
Auto
: Automatically selects a suitable color range for the incoming HDMI signal.
•
RGB Full
: Utilizes the Full range RGB 0-255.
•
RGB Limited
: Utilizes the Limited range RGB 16-235.
Eco Mode
This setting reduces system noise and power consumption by 30%. If
Eco Mode
is selected, the light output will be reduced.
High Altitude
Mode
We recommend you use the
High Altitude Mode
when your environment is between 1500 m - 2000 m above sea level, and
ambient temperature is between 0
˚
C to 30
˚
C.
Operation under
High Altitude Mode
may cause a higher decibel operating noise level because of increased fan speed
necessary to improve overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display auto shut-down symptoms, which is
designed to protect your projector from over-heating. In cases like this, you should switch to
High Altitude Mode
to solve
these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme conditions.
Do not use the
High Altitude Mode
if your altitude is between 0 m and 1500 m and ambient temperature is between 0
˚
C to 35
˚
C. The projector
will be over cooled, if you turn the mode on under such a condition.
