22
″
LCD Color Monitor BenQ G2200WE
24
Factory OSD Menu
Turn off the monitor, keep pressing the “MENU” buttons, and turn on the monitor, then when we press the MENU
button, the factory OSD will be at the left top of the panel as below:
BenQ Service Page
1. Trigger method: press “Menu” key and Power on.
2. Press the menu key will display the service page
3. Press the menu key will close the service page.
4. Power off will quit the service mode
5. At the service mode, the key function is same as normal OSD define.
6. The timer can only reset at the service mode by “Timer Reset” (Timer Reset moves to SI factory Area). And
need to have a warning message to double confirm the reset function. The timer should record up to 99999
hours.
7. Add one select item for HDCP(DVI port),Mode1,Mode2 at Service menu
Mode1: To enable the hot plug pin detection. (HDMI port default)
Mode 2: To disable the hot plug pin detection. (DVI port default)
8. Add BenQ logo on/off item, the default is “on”
9. Add the auto power on item, the default is “off ”
10. Panel type define need to have the panel version.
11. F/W version need to define the dual or analog model.
Downloaded from ManualMonitor.com Manuals
Summary of Contents for G2200WE
