Make sure the cabling is complete for luminaire to install on the ceiling as shown in Figure 6
6
8.1
8.2
9.2
9.1
Use the suspension accessory to
install the luminaire to the ceiling as
shown in Figure 8
Completion (Figure 7)
Completion (Figure 9)
7
Mount the driver to the back of the panel light as shown in Figure 4-1.
Use the wire ring to tie the wires together before installing with the cover. (Figure 4-2)
Screw and lock the two covers to the back of the Flat Panel Light.
Make sure the cover is tightly screwed.
AC Power Cables
Connect WHITE Wire to insulation terminal
Connect BLACK wire to insulation terminal
N
L
Suspension Mode
Recessed Mode
Bringing Enjoyment & Quality to life
BenQ Ligh
ti
ng
Figure 4-1
Figure 4-2
Figure 6
Figure 5
Figure 7
Figure 9
Figure 8
Spring washer
