![background image](http://html.mh-extra.com/html/benq/fp93g/fp93g_user-manual_2734149012.webp)
12
How to install your monitor hardware
To attach the rear cover:
3. Remove the rear cover.
Pull around the edge of the rear cover and slightly lift it to
reveal the screw plate at the back of the monitor.
4. Follow the instruction manuals of the wall mount
bracket you purchased to complete the installation.
1. Tilt the rear cover forward and insert the two tabs on
the front edge into the recesses of the screw plate.
No tools are required.
2. Position the two tabs on left side of the rear cover to
fit into the grooves in the screw plate.
3. Push the other two tabs on the right side of the rear
cover inward so that they could snap into the aligned
grooves.
There will be a clicking sound as the rear cover is
perfectly attached.