12 Capture mode
Eng
lish
To select white balance:
1. Press
>
White balance
.
2. Press
or to select an select a white balance option. (When selecting the manual
mode, you must first point the adjustment frame shown on the screen at a blank sheet of
white paper or something similar, and press the Shutter for the camera to detect proper
colors.)
3. Press
to confirm setting.
ISO
ISO configures the camera’s sensitivity to light. The higher the ISO value, the brighter
picture you can take in a low-light environment. Yet, you may see more noise in the picture
as you increase the ISO value.
To select an ISO value:
1. Press
>
ISO
.
2. Press
or to select an ISO Value.
3. Press
to confirm setting.
AE metering
To select an AE metering option:
1. Press
>
Metering
.
2. Press
or to select an AE metering option.
3. Press
to confirm setting.
Icon
Description
Automatically sets the ISO value.
Equivalent to color ISO 50/100/200 film. Used for outdoor
photography in bright sunlight.
Equivalent to color ISO 400/800/1600/3200 film. Used it in a
low-light environment or where the flash light is not allowed.
ISO 3200 for resolution 3M or under only.
Icon
Mode
Description
Matrix
Detects the exposure based on multiple points in
the subject area.
Cent. Weight (Center Weight) Detects the exposure of the entire shooting
screen, but gives more importance to the values
near center.
Spot
Detects the exposure based on the center spot in
the subject area.
E1220_UM - EN.book Page 12 Wednesday, February 25, 2009 5:00 PM