Application instructions
9
Applications
Power on the camera, then press the “SET” and “*” keys at the same time for five
seconds. The indicator light will be on. Then release the button and power on the
camera again when the light is flashing. The pairing process will be done when the
indicator light stops flashing. Users can control the pan/tilt/zoom, set and call preset
positions via the wireless remote control.
Key instructions
1. In this instruction, “press the key” means a click rather than a long-press, and a spe-
cial note will be given if a long-press for more than one second is required.
2. When a key-combination is required, do it in sequence. For example, “* + # + F1”
means press “*” first and then press “#” and last press “F1”.
Items
Instruction
1. Pan/Tilt Control
• Press
/
/
/
• Press “HOME” to go back to the middle position
• Press and hold the
/
/
/
key, and the pan/tilt will
keep running, from slow to fast, until it runs to the end
point; the pan/tilt running stops as soon as the key is
released.
2. Presets
• Preset setting: To set a preset position, the users
should press the “SET PRESET” key first and then press
the number key 0-9 to set a relative preset.
Note: 10 preset positions in total are available by the remote
control.
• Preset calling: Press a number key 0-9 directly to call a
relative preset.
Note: Action in vain if a relative preset position is not existed.
• Preset clearing: To clear a preset position, the user can
press the “CLEAR PRESET” key first and then press the
number key 0-9 to clear the relative preset.
Note: Press the “#” key three times continually to cancel all the
presets.
3. Zoom Control
ZOOM IN: Press “ZOOM +” key
ZOOM OUT: Press “ZOOM -” key
Press and hold the key, the camera will keep zooming in
or out and stops as soon as the key is released.
4. Focus Control
Focus (near): Press “focus +” key (Valid only in manual
focus mode)
Focus (far): Press “focus -” key (Valid only in manual
focus mode)
Auto Focus/Manual Focus: Yes
Press and hold the key, then the action of focus will
continue and stops as soon as the key is released.
