EN
G
L
IS
H
3
Name
Function
(2) USB Flash Drive port
Insert a USB flash drive for audio video recording.
(3) Power button
Turn the unit on/standby mode.
Rear Panel
(3)
(1)
(2)
(
fig. 1.3
)
Name
Function
(1) DC12V / LIGHTBOX port
Connect the power adapter into this port.
(2) DVI-I
OUTPUT
port
Connect the DCP10 to any display device with DVI cable.
If the display device does not support DVI-I, you can only
view in Camera and Playback mode.
(3) RGB
OUTPUT
port
Connect the DCP10 to any display device with RGB cable
Left Panel
(1)
(7)
(5)
(6)
(4)
(3)
(2)
(
fig. 1.4
)
Name
Function
(1) Mini USB port
Connect to a USB port of a computer with a USB cable and use
DCP10 as a USB Camera or transfer the captured images/videos
either from the memory source to computer.
(2) RGB INPUT port
Input the signal from a computer or other sources and pass it
through to the RGB OUTPUT port only. Connect this port to the
RGB/VGA output port of a computer.
(3) MIC
port
Connect a 3.5mm plug microphone. The built-in mic will be
disabled when an external MIC is connected to this port.
(4) Speaker
port
Connect to an amplified speaker to playback recorded audio &
video clip.
(5) RS-232/CVBS
port Connect the supplied RS-232/CVBS cable into this port. The RCA
jack outputs the video signal from the camera to a TV or video
equipment. The RS-232 jack is used to connect to computer serial
port or to any control panel or for centralized control if desire.
(6) TV-RGB
switch
TV switch to output display video from RS232/CVBS (via RCA
connection), and RGB to RGB and DVI-I OUTPUT ports.
