BenQ DC 5530 User’s Manual
En
gli
sh
Using the DC E520
13
3.2
Movie Mode
With the specially designed pause function of the DC E520, you can pause your recording
session whenever you want to best suit your need. Experience this feature with the following
easy steps.
1. Toggle the [
] button to enter Movie Mode. The video clip recording screen is
displayed.
2. Frame the subject in the LCD screen with the zoom button, if desired.
•
Optical zoom should be set before recording.
•
Optical zoom cannot be used during recording.
3. Press the shutter button to start recording.
•
To stop the recording session, press the shutter button again.
•
To pause the recording session, press the
OK
button. To resume, press the
OK
button
again.
•
The flash cannot be used in Movie Mode.
•
EV compensation cannot bet set or activated in Movie Mode.
•
While a video is being recorded to an SD memory card, neither open the battery/SD mem-
ory card cover, nor remove the battery/SD memory card. Doing so might damage the SD
memory card or destroy the data.
•
The length of the recording depends on the remaining capacity of your memory card or
the camera’s built-in memory. The remaining time is displayed on the upper right corner
of the LCD monitor.
3.2.1 Movie Mode LCD Monitor Information
1. Movie Mode
2. Available recording time
3. Movie Quality
4. Zoom status
5. Battery power level indicator
3.2.2 Movie Mode Menu Settings
3.2.2.1
Movie Mode Menu
1. In Movie Mode, press the [
] button to access the
menu, and then use the [
]/[
] buttons to select
the menu settings you want to change.
2. Use the [
]/
[
]
buttons to select the desired item in
the menu, and then press the
OK
button.
3. To exit from the menu, press the [
] button.
DC_E520_UM.book Page 13 Monday, May 30, 2005 10:56 AM
