BenQ DC 5530 User’s Manual
Using the DC C60
24
Eng
lish
1. Set the mode dial to [ AV ] and press the [
] button.
2. Set the aperture value with the command dial.
•
Turn the command dial to the
side to increase the
value.
•
Turn the command dial to the
side to decrease the
value.
•
The setting range is as follows.
F6.7/F5.6/F 4.8/F4.0/F3.5/F2.8
•
The aperture and corresponding shutter speed are dis-
played on the screen. If an appropriate combination
cannot be set, the shutter speed value is displayed in red,
but photographs can be taken.halfway, then press it
down fully.
3. Compose the picture, press the shutter button down
halfway, then press it down fully.
3.5. Full Manual Mode
[ M ]
This mode can set the aperture and shutter speed values separately before taking a
photograph. Both the aperture value and shutter speed can be changed by rotating the
Command dial.
1. Set the mode dial to [ M ].
2. Select the shutter speed or the aperture with the
[
] button.
3. Set the shutter speed or the aperture value with the
command dial.
4. Compose the picture, press the shutter button down
halfway, then press it down fully.
Note
•
The aperture value is adjusted automatically depending on the position of the
zoom lens.
