![background image](http://html.mh-extra.com/html/benq/dc-2410/dc-2410_user-manual_2733637009.webp)
BenQ DC 2410 User’s Manual
6
3. U
SING
THE
DC 2410
The functions of DC 2410 are mainly composed of five modes: Recording mode, Playback
mode, Video Mode, and Setup Mode. In this chapter, we will introduce the functions of DC
2410 according to these four modes.
Basic Photography
1. Open the lens cover.
2. Switch on the power.
3. Set the Mode Dial at Shooting Mode (
) for still image or Movie Clip Mode (
) for
video recording.
4. The setting of the focus range for still image capture is required as follows:
Macro (
) : 0.2m
Normal (
): 0.8m~infinity
5. Refer to the next section -- “Working Mode” (page 7) to set up the features you prefer.
6. Hold still and press down the Shutter Button.
7. The LED Indicator starts blinking right after the Shutter Button is released.
8. Once the LED Indicator stops blinking, you are ready to take another shot.
Note
A message of "LENS COVER" blinking on the TFT LCD Monitor as a warning is to remind
you of opening the lens cover first.
Note
The TFT LCD Monitor will show "Low Light!" as a warning to remind you that the image
which you are going to capture is in a low light environment. It is suggested to set the Flash
Mode at Auto Flash or Fill-in Flash for supplementary light to compose a good image.
1.
2.
3.
4.
5.
Summary of Contents for DC 2410
Page 1: ...DC 2410 User s Manual ...