22
Using the BenQ Joybee 130 Digital Audio Player
2. Press the button
to pause recording and press it again to resume recording.
3.
Press the button
to stop recording.
• Note that recorder function is only available in voice recording (by built-in micro-
phone) and FM radio recording (in FM radio mode).
• To distinguish the files recorded from FM radio and from MIC, recorded files are
divided as FM0001.wav for FM recording and MIC0001.wav for MICIN recording.
However, both files cannot be stored in SD/MMC card but Joybee 130 only.
Playing Recorded Voice/FM Files
The VOICE mode enables you to play back your recorded voice files or FM radio
programs. All voice recorded signals are saved as WAV files with a filename such as
MIC001.wav while FM programs are saved with filenames such as FM001.wav. The
number at the end of the filename indicates the order in which the signal was recorded.
Use the following procedure to listen to your recorded voice files.
1. Press down the jog wheel and turn on the Joybee 130.
2. Press the button
, slide the jog wheel up or down to select VOICE mode. Press
down the jog wheel to confirm.
3. Press down the jog wheel to play the current file.
4. Slide the jog wheel up or down to go to the previous/next tracks.
5. Press down the jog wheel to puase playback. Press down the jog wheel again to
resume playback.
6. Use the
buttons to increase or decrease the volume as desired during play-
back.
The LCD display shows the volume setting when you change the volume.
The play mode and equalizer functions are also available when you play back a
recorded signal. Refer to "Repeat Play" on page 17 and "Selecting an EQ Mode" on
page 18 for more details.
Deleting Files From Joybee 130