Welcome
Congratulations on your purchase of the BenQ Bluetooth keyboard.
Simply follow the instructions in this guide, and in a few minutes you’ll be
enjoying the freedom of wireless technology and the eye-pleasing
efficiency of a clutter-free desktop.
1. Insert the Batteries & How to Recharging
You’ll find batteries for the keyboard included in this package. If you need
to replace the batteries in the future, make sure that you use new batteries
and that you change all of the batteries at the same time. Alkaline
batteries are recommended.
Step 1: Turn the keyboard upside down.
Step 2: Carefully remove the battery compartment covers.
Step 3: Insert new batteries, making sure to properly orient the positive (+) and
negative (-) ends as specified by the battery compartment labels.
Step 4: Gently slide the battery compartment covers back into place.
You could take steps of recharging these batteries below if power of these
rechargeable batteries is down.
Step1: Please remove cover of the cradle, and link the ac adapter to the cradle.
Step2: Then plug the plug of ac adapter into electronic outlet.
Step3: When the LED light is red, it means the batteries are under recharging.
When the LED transfers into green, the process of charging is over.
2. Hardware Installation
The cradle and dongle give the keyboard and mouse the ability to
communicate with your computer.
Option 1: Use cradle and dongle (suitable for NB or Desktop computer)
Step 1: Plug the USB connector of cradle into your computer’s rectangular USB port.
Step 2: Plug the USB connector of dongle into the cradle USB port.
Step 3: System will automatically detect the new hardware.
Option 2: Just use dongle (suitable for NB)
Step 1: Plug the USB connector of dongle into your computer’s rectangular USB port.
Step 2: System will automatically detect the new hardware.
3. Establish a Wireless Connection
Boot Mode (without installing software, and there is no hotkey function)
