![background image](http://html.mh-extra.com/html/benq/ae220-series/ae220-series_user-manual_2733620013.webp)
Preparing the camera for use 13
Engli
sh
Preparing the camera for use
Use only the specified battery for the camera, and always turn off the camera
before removing the battery.
Charging the battery
The battery charge status affects the camera performance. To maximize the
performance and the battery life, fully charge the battery via a wall outlet (or a
computer), and then fully discharge it through normal use at least once.
To charge the battery via a wall outlet:
1. Turn off the camera.
2. Insert the battery into the camera.
3. Open the USB port cover.
4. Connect one end of the USB cable to the
camera.
5. Connect the other end of the USB cable
to the power adapter.
6. Plug in the power adapter to a wall outlet. The battery will start charging
immediately.
A
To install the battery:
1. Release and open the battery/card cover (A).
2. Insert the battery in the correct direction by
matching the + - label on the battery slot (B).
3. Push the battery all the way down.
4. Close and lock the battery/card cover (D).
B
C
To remove the battery:
1. Release and open the battery/card cover (C).
2. Pull the battery out.
3. Close and lock the battery/card cover (D).
D
AE220 UM - EN.book Page 13 Wednesday, August 8, 2012 5:11 PM