10 Introduction
Remote control effective range
The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR
remote control sensor(s) to function correctly. The distance between the remote control and the
sensor(s) should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor(s) on the
projector that might obstruct the infra-red beam.
6.
SOURCE
Displays the source selection bar.
7.
ECO BLANK
Used to hide the screen picture.
Do not block the projection lens from
projecting as this could cause the blocking
object to become heated and deformed or
even cause a fire.
8.
OK
Confirms the selected On-Screen Display
(OSD) menu item.
9.
AUTO
Automatically determines the best picture
timings for the displayed image when PC signal
(analog RGB) is selected.
10.
MENU
Turns on the On-Screen Display (OSD) menu.
11.
Displays the keystone menu.
12.
PIC MODE
Selects the picture mode.
13.
Toggles projector audio between on and off.
14.
MHL Zone
This model does not support MHL functions.
15.
SOUND MODE
Selects the sound mode.
16.
LUMIEXPERT BOOST
Displays the LumiExpert Boost menu.
17. Volume keys
/
Decreases or increases the projector volume.
• Operating the projector from the front
• Operating the projector from the top
Appro
x. +3
0º
Appro
x. +3
0º
